Fluorescent light fitting PSF


Housing: SMC polyester plastic reinforced with glass fiber, color RAL 7038
Diffuser: PC polycarbonate plastic
Gasket: silicone
Central locking: can be opened/closed using a socket key SW8, hinged lamp cover
The light fitting is normally supplied without light sources, socket key screw, two Ex e cable glands M25, two Ex e plugs M25 and with four ring screw M8 (pendant version).

Apparatus category: II 2GD,  IM2
Explosion protection: Ex db eb mb IIC T4 Gb
Ex tb IIIA/IIIC T80°C Db, Ex db eb mb l Mb
Enviroment temperature: -30ºC ≤ Ta ≤ +50ºC [ATEX]
-50ºC ≤ Ta ≤ +40ºC [EAC]
Degree of protection: IP66
Rated voltage: 220-240 V

Zone 1,2,21,22

● T8 fluorescent lamps in parallel configuration
● Central locking
● Switch with safety lock; when opening the central lock, all poles of the volt-age supply to the ballast are discon-nected
● In case of a lamp fault, the electronic ballast disconnects the defective lamp from the power supply.

Send us request